Models / Sector-lock tilting stand

Sector-lock tilting stand

Sector stand: a tilting deck on two trunnions, locked through curved slots. Glue the fixed cheeks into the foot, and the moving flanges and front lip into the deck. Bolt each flange to its cheek at the pivot and arc slot. Loosen both arc bolts before adjusting, then tighten them again.

Download size: 596.5 × 350.5 mm. 7 parts on 1 sheet.

Source 78 lines

// Sector stand: a tilting deck on two trunnions, locked through curved slots.
// Glue the fixed cheeks into the foot, and the moving flanges and front lip
// into the deck. Bolt each flange to its cheek at the pivot and arc slot.
// Loosen both arc bolts before adjusting, then tighten them again.
 
use <kerf/tabs>
 
/* [Stand] */
width = 180; // [130:5:260]
depth = 130; // [110:5:190]
base_depth = 190; // [165:5:250]
pivot_height = 65; // [55:5:90]
radius = 78; // [65:1:100]
angle = 35; // [10:1:65]
lip_height = 18; // [14:1:25]
 
/* [Material] */
$thickness = 3; // [2:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]
clearance = 0.15; // [0:0.05:0.4]
bolt_diameter = 4; // [3:0.5:5]
washer_gap = 0.6; // [0.3:0.1:1]
 
/* [Hidden] */
$material = "plywood";
t = $thickness;
py = 25;
v = 10;
assert(angle >= 10 && angle <= 65, "Keep the deck within the arc-slot limits");
assert(radius < depth - 20, "Keep the clamp pivot inside the flange");
assert(base_depth > py + radius + 18, "Lengthen the foot under the arc cheeks");
assert(pivot_height > 2 * t + 24, "Raise the deck above the foot");
function arc(a, r = radius) = [py + r * cos(a), pivot_height - t + r * sin(a)];
function moving(u, z = 0) = [0, py + u * cos(angle) - z * sin(angle), pivot_height + u * sin(angle) + z * cos(angle)];
function fixed_x(s) = s < 0 ? -width / 2 - washer_gap - t : width / 2 + washer_gap;
function flange_x(s) = s < 0 ? -width / 2 + 4 : width / 2 - 4 - t;
step("Glue the fixed cheeks into the foot") {
  // The foot cuts the slots for the cheeks' tabs
  part("Foot", at = [0, 0, 0], slots = ["Left fixed sector", "Right fixed sector"], clearance = clearance)
    translate([-(width + 4 * t + 12) / 2, 0]) rect([width + 4 * t + 12, base_depth], r = 5);
  for (s = [-1, 1])
    part(str(s < 0 ? "Left" : "Right", " fixed sector"), at = [fixed_x(s), 0, t], rotate = [90, 0, 90]) difference() {
      union() {
        hull() {
          rect([base_depth, 10]);
          for (a = [0:5:75]) translate(arc(a, radius + 12)) circle(r = 1);
          translate([py, pivot_height - t]) circle(r = 12);
        }
        for (y = [40, base_depth - 40]) translate([y - 10, -t]) rect([20, t]);
      }
      translate([py, pivot_height - t]) circle(d = bolt_diameter + 0.3);
      union() {
        polygon(concat([for (a = [10:1:65]) arc(a, radius + (bolt_diameter + 0.5) / 2)],
          [for (a = [65:-1:10]) arc(a, radius - (bolt_diameter + 0.5) / 2)]));
        for (a = [10, 65]) translate(arc(a)) circle(d = bolt_diameter + 0.5);
      }
    }
}
step("Glue the moving flanges and the front lip into the deck") {
  for (s = [-1, 1])
    part(str(s < 0 ? "Left" : "Right", " moving flange"), at = [flange_x(s), py, pivot_height], rotate = [90, -angle, 90]) difference() {
      union() {
        hull() { circle(r = 10); translate([depth - 5, 0]) rect([10, 20], center = true); }
        for (u = [depth / 4, 3 * depth / 4]) translate([u - 6, v]) rect([12, t]);
      }
      for (u = [0, radius]) translate([u, 0]) circle(d = bolt_diameter + 0.3);
    }
  // The deck cuts the slots for the flanges' tabs, at the deck's angle
  part("Tilting deck", at = moving(0, v) + [-width / 2, 0, 0], rotate = [angle, 0, 0],
    slots = ["Left moving flange", "Right moving flange"], clearance = clearance)
    finger_rect([width, depth], ["out", "flat", "flat", "flat"]);
  part("Front lip", at = moving(t, v) + [-width / 2, 0, 0], rotate = [90 + angle, 0, 0])
    finger_rect([width, lip_height], ["in", "flat", "flat", "flat"]);
}
step("Bolt each flange to its cheek at the pivot and through the arc slot")
  for (s = [-1, 1], u = [0, radius]) let (p = moving(u), lo = min(fixed_x(s), flange_x(s)) - 1,
    hi = max(fixed_x(s), flange_x(s)) + t + 1)
    hardware("steel", [lo, p[1], p[2]], [hi, p[1], p[2]], bolt_diameter, label = u == 0 ? "pivot bolt" : "clamp bolt");