Models / Plant display plinth

Plant display plinth

Plant plinth: two crossing half-lapped frames support a circular top. Pot diameter sets the top and footprint; height sets the support frames. Assembly: cross the frames at their half-depth slots and glue on the top. Use as a small display stand after checking the material's load capacity.

Download size: 360.9 × 140.2 mm. 3 parts on 1 sheet.

Source 35 lines

// Plant plinth: two crossing half-lapped frames support a circular top.
// Pot diameter sets the top and footprint; height sets the support frames.
// Assembly: cross the frames at their half-depth slots and glue on the top.
// Use as a small display stand after checking the material's load capacity.
 
/* [Stand] */
pot_diameter = 110; // [70:5:180]
height = 85; // [50:5:150]
rim = 12; // [8:1:20]
leg_width = 22; // [16:1:35]
 
/* [Material] */
$thickness = 4; // [3:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]
clearance = 0.15; // [0:0.05:0.4]
 
/* [Hidden] */
$material = "plywood";
t = $thickness;
diameter = pot_diameter + 2 * rim;
span = diameter * 0.8;
assert(span > 3 * leg_width + 8, "Reduce leg width or enlarge the top");
assert(height > leg_width + 12, "Increase height to leave a clear opening");
module frame(top_slot = false) difference() {
  rect([span, height]);
  window = (span - 3 * leg_width) / 2;
  for (x = [leg_width, 2 * leg_width + window]) translate([x, height * 0.2]) rect([window, height * 0.5], r = 3);
  translate([span / 2 - (t + clearance) / 2, top_slot ? height / 2 : -1]) rect([t + clearance, height / 2 + 1]);
}
step("Cross the two frames at their half-depth slots") {
  part("Frame A", at = [-span / 2, t / 2, 0], rotate = [90, 0, 0]) frame(true);
  part("Frame B", at = [-t / 2, -span / 2, 0], rotate = [90, 0, 90]) frame(false);
}
step("Glue the top on")
  part("Top", at = [0, 0, height]) circle(d = diameter);