// Plant plinth: two crossing half-lapped frames support a circular top. // Pot diameter sets the top and footprint; height sets the support frames. // Assembly: cross the frames at their half-depth slots and glue on the top. // Use as a small display stand after checking the material's load capacity. /* [Stand] */ pot_diameter = 110; // [70:5:180] height = 85; // [50:5:150] rim = 12; // [8:1:20] leg_width = 22; // [16:1:35] /* [Material] */ $thickness = 4; // [3:0.5:6] $kerf = 0.15; // [0:0.01:0.3] clearance = 0.15; // [0:0.05:0.4] /* [Hidden] */ $material = "plywood"; t = $thickness; diameter = pot_diameter + 2 * rim; span = diameter * 0.8; assert(span > 3 * leg_width + 8, "Reduce leg width or enlarge the top"); assert(height > leg_width + 12, "Increase height to leave a clear opening"); module frame(top_slot = false) difference() { rect([span, height]); window = (span - 3 * leg_width) / 2; for (x = [leg_width, 2 * leg_width + window]) translate([x, height * 0.2]) rect([window, height * 0.5], r = 3); translate([span / 2 - (t + clearance) / 2, top_slot ? height / 2 : -1]) rect([t + clearance, height / 2 + 1]); } step("Cross the two frames at their half-depth slots") { part("Frame A", at = [-span / 2, t / 2, 0], rotate = [90, 0, 0]) frame(true); part("Frame B", at = [-t / 2, -span / 2, 0], rotate = [90, 0, 90]) frame(false); } step("Glue the top on") part("Top", at = [0, 0, height]) circle(d = diameter);