Models / Perforated display deck

Perforated display deck

Perforated deck: a raised shelf locates bottles or display eggs over a foot. Hole pitch, diameter and the grid count determine the footprint. An egg display is a parameter preset of this construction, not another model. Assembly: glue the two side supports into the foot, then add the deck.

Download size: 588.5 × 181.3 mm. 4 parts on 1 sheet.

Source 40 lines

// Perforated deck: a raised shelf locates bottles or display eggs over a foot.
// Hole pitch, diameter and the grid count determine the footprint. An egg
// display is a parameter preset of this construction, not another model.
// Assembly: glue the two side supports into the foot, then add the deck.
 
use <kerf/tabs>
 
/* [Hole grid] */
columns = 6; // [2:1:10]
rows = 3; // [1:1:5]
diameter = 26; // [16:1:42]
pitch = 35; // [24:1:55]
deck_height = 32; // [20:2:70]
 
/* [Material] */
$thickness = 3; // [2:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]
clearance = 0.15; // [0:0.05:0.4]
 
/* [Hidden] */
$material = "plywood";
t = $thickness;
span = (columns - 1) * pitch + diameter + 18;
depth = (rows - 1) * pitch + diameter + 18;
assert(pitch >= diameter + 5, "Increase pitch to leave 5 mm between holes");
step("Lay the foot flat")
  part("Foot", at = [-t - 6, -6, 0]) difference() {
    rect([span + 2 * t + 12, depth + 12], r = 4);
    for (x = [6 + t / 2, 6 + 1.5 * t + span]) translate([x, 6]) rotate(90) slots(depth, clearance = clearance);
  }
step("Glue the two side supports into the foot")
  part("Side", qty = 2, at = [[-t, 0, t], [span, 0, t]], rotate = [90, 0, 90]) difference() {
    union() { rect([depth, deck_height + t + 8], r = 2); tabs(depth); }
    translate([0, deck_height + t / 2]) slots(depth, clearance = clearance);
  }
step("Glue the deck onto the side supports")
  part("Bottle deck", at = [0, 0, t + deck_height]) difference() {
    tab_rect([span, depth], [false, true, false, true]);
    for (i = [0:columns - 1], j = [0:rows - 1]) translate([9 + diameter / 2 + i * pitch, 9 + diameter / 2 + j * pitch]) circle(d = diameter);
  }