// Perforated deck: a raised shelf locates bottles or display eggs over a foot. // Hole pitch, diameter and the grid count determine the footprint. An egg // display is a parameter preset of this construction, not another model. // Assembly: glue the two side supports into the foot, then add the deck. use /* [Hole grid] */ columns = 6; // [2:1:10] rows = 3; // [1:1:5] diameter = 26; // [16:1:42] pitch = 35; // [24:1:55] deck_height = 32; // [20:2:70] /* [Material] */ $thickness = 3; // [2:0.5:6] $kerf = 0.15; // [0:0.01:0.3] clearance = 0.15; // [0:0.05:0.4] /* [Hidden] */ $material = "plywood"; t = $thickness; span = (columns - 1) * pitch + diameter + 18; depth = (rows - 1) * pitch + diameter + 18; assert(pitch >= diameter + 5, "Increase pitch to leave 5 mm between holes"); step("Lay the foot flat") part("Foot", at = [-t - 6, -6, 0]) difference() { rect([span + 2 * t + 12, depth + 12], r = 4); for (x = [6 + t / 2, 6 + 1.5 * t + span]) translate([x, 6]) rotate(90) slots(depth, clearance = clearance); } step("Glue the two side supports into the foot") part("Side", qty = 2, at = [[-t, 0, t], [span, 0, t]], rotate = [90, 0, 90]) difference() { union() { rect([depth, deck_height + t + 8], r = 2); tabs(depth); } translate([0, deck_height + t / 2]) slots(depth, clearance = clearance); } step("Glue the deck onto the side supports") part("Bottle deck", at = [0, 0, t + deck_height]) difference() { tab_rect([span, depth], [false, true, false, true]); for (i = [0:columns - 1], j = [0:rows - 1]) translate([9 + diameter / 2 + i * pitch, 9 + diameter / 2 + j * pitch]) circle(d = diameter); }