Models / Napkin bridge
Napkin bridge
Napkin bridge: two scooped cheeks stand in a slotted rectangular foot. The clear gap follows the napkin stack, rather than a fixed sheet size. Assembly: glue both cheeks into the foot after checking the slot fit.
Download size: 490.5 × 97.2 mm. 3 parts on 1 sheet.
Source
// Napkin bridge: two scooped cheeks stand in a slotted rectangular foot.
// The clear gap follows the napkin stack, rather than a fixed sheet size.
// Assembly: glue both cheeks into the foot after checking the slot fit.
use <kerf/tabs>
/* [Holder] */
width = 170; // [100:5:260]
height = 88; // [55:5:140]
clear_gap = 40; // [20:5:90]
scoop = 18; // [0:1:30]
/* [Material] */
$thickness = 3; // [2:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]
clearance = 0.15; // [0:0.05:0.4]
/* [Hidden] */
$material = "plywood";
t = $thickness;
depth = clear_gap + 2 * t + 24;
centres = [12 + t / 2, 12 + 1.5 * t + clear_gap];
step("Lay the foot flat and check the slot fit")
part("Foot", at = [0, 0, 0]) difference() {
rect([width, depth], r = 5);
for (y = centres) translate([8, y]) slots(width - 16, clearance = clearance);
}
step("Glue both cheeks into the foot")
part("Cheek", qty = 2, at = [for (y = centres) [8, y + t / 2, t]], rotate = [90, 0, 0]) difference() {
union() { rect([width - 16, height], r = 4); tabs(width - 16); }
if (scoop > 0) translate([(width - 16) / 2, height]) ellipse([(width - 16) * 0.3, scoop]);
}