Models / Tissue carton cover
Tissue carton cover
Tissue cover: an open-bottom sleeve sized around a refill carton. A rounded dispensing slot is cut into the finger-jointed top panel. Assembly: glue the top and four walls; slide it over the carton.
Download size: 497.5 × 229.3 mm. 5 parts on 1 sheet.
Source
// Tissue cover: an open-bottom sleeve sized around a refill carton.
// A rounded dispensing slot is cut into the finger-jointed top panel.
// Assembly: glue the top and four walls; slide it over the carton.
/* [Refill] */
carton_width = 225; // [120:5:280]
carton_depth = 115; // [80:5:170]
carton_height = 90; // [50:5:150]
ease = 2; // [1:0.5:5]
opening = 100; // [50:5:150]
/* [Material] */
$thickness = 3; // [2:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]
/* [Hidden] */
$material = "plywood";
t = $thickness;
w = carton_width + 2 * ease + 2 * t;
d = carton_depth + 2 * ease + 2 * t;
h = carton_height + ease + t;
assert(opening < w - 8 * t, "Opening leaves too little material at its ends");
part("Top", at = [0, 0, h - t]) difference() {
finger_rect([w, d], "out");
translate([w / 2, d / 2]) rect([opening, 28], center = true, r = 14);
}
part("Long wall", qty = 2, at = [[0, t, 0], [0, d, 0]], rotate = [90, 0, 0])
finger_rect([w, h], ["flat", "out", "in", "out"]);
part("End wall", qty = 2, at = [[0, 0, 0], [w - t, 0, 0]], rotate = [90, 0, 90])
finger_rect([d, h], ["flat", "in", "in", "in"]);