Models / Stem lab tube stand

Stem lab tube stand

Stem lab: two perforated decks hold removable glass tubes above a base. Tube diameter and pitch define the deck size and the side supports. Assembly: glue decks into side slots. Glass tubes are separate hardware. Water belongs inside the tubes; the plywood is not a watertight vase.

Download size: 584.8 × 124.2 mm. 5 parts on 1 sheet.

Source 42 lines

// Stem lab: two perforated decks hold removable glass tubes above a base.
// Tube diameter and pitch define the deck size and the side supports.
// Assembly: glue decks into side slots. Glass tubes are separate hardware.
// Water belongs inside the tubes; the plywood is not a watertight vase.
 
use <kerf/tabs>
 
/* [Tubes] */
tubes = 4; // [1:1:8]
tube_diameter = 18; // [10:1:30]
pitch = 34; // [24:2:55]
height = 115; // [70:5:170]
depth = 50; // [40:5:90]
 
/* [Material] */
$thickness = 3; // [2:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]
clearance = 0.15; // [0:0.05:0.4]
 
/* [Hidden] */
$material = "plywood";
t = $thickness;
span = (tubes - 1) * pitch + tube_diameter + 24;
levels = [height * 0.35, height - 12];
assert(pitch >= tube_diameter + 6, "Increase pitch to leave a web between tubes");
// Steps are numbered in the order they first run, so name them here in build order
step("Glue the tube decks into the side slots") {}
step("Glue the sides into the base")
  part("Base", at = [-t - 8, -8, 0]) difference() {
    rect([span + 2 * t + 16, depth + 16], r = 5);
    for (x = [8 + t / 2, 8 + 1.5 * t + span]) translate([x, 8]) rotate(90) slots(depth, clearance = clearance);
  }
step("Glue the tube decks into the side slots") {
  part("Side", qty = 2, at = [[-t, 0, t], [span, 0, t]], rotate = [90, 0, 90]) difference() {
    union() { rect([depth, height], r = 4); tabs(depth); }
    for (z = levels) translate([0, z + t / 2]) slots(depth, clearance = clearance);
  }
  part("Tube deck", qty = 2, at = [for (z = levels) [0, 0, t + z]]) difference() {
    tab_rect([span, depth], [false, true, false, true]);
    for (i = [0:tubes - 1]) translate([12 + tube_diameter / 2 + i * pitch, depth / 2]) circle(d = tube_diameter + 0.6);
  }
}