Models / SLOT desk sign

SLOT desk sign

SLOT, a first project: a desk sign in two pieces. A panel with a tab slips into a slot in a base. Change the word, the outline, the motif and the size; the tab, the slot and the base follow. The word and the motif are scored, so nothing falls out of the letters.

Download size: 246.3 × 125 mm. 2 parts on 1 sheet.

Source 115 lines

// SLOT, a first project: a desk sign in two pieces. A panel with a tab slips
// into a slot in a base. Change the word, the outline, the motif and the
// size; the tab, the slot and the base follow. The word and the motif are
// scored, so nothing falls out of the letters.
 
/* [Make it yours] */
// One short word or name, shown in capitals
label = "HELLO"; // 10
// Outline of the panel
shape = "arch"; // [arch:Arch, hex:Hexagon, round:Round]
// Drawing above the word
pattern = "sun"; // [sun:Sunburst, tiles:Honeycomb, stars:Moon and stars, leaves:Leaf sprig]
// Panel width
width = 120; // [100:5:160]
// Panel height above the base
height = 110; // [90:5:140]
// The sign, or two scraps to test the slot fit first
output = "sign"; // [sign:Desk sign, fit:Fit test]
 
/* [Material] */
// Sheet thickness, measured
$thickness = 3; // [2.8:0.1:3.2]
// Added to the slot width, in total
clearance = 0.1; // [0.1:0.05:0.2]
// Beam width
$kerf = 0.15; // [0:0.01:0.25]
 
/* [Hidden] */
$material = "plywood";
$sheet = [360, 240];
$gap = 6;
$fn = 96;
t = $thickness;
tab_width = width * 0.36;
// A little shorter than the base is thick, so the sign never rocks on its tab
tab_depth = t - 0.15;
base_width = width * 0.9;
base_depth = max(60, height * 0.6);
word = upper(label);
motif_scale = min(width, height) / 110;
 
// The outline has a flat bottom: its shoulders sit on the base
module face() {
  if (shape == "arch") polygon(concat([[-width / 2, 0], [width / 2, 0]],
    [for (a = [0:3:180]) [width / 2 * cos(a), height * (0.55 + 0.45 * sin(a))]]));
  if (shape == "hex") polygon([[-0.32 * width, 0], [0.32 * width, 0], [width / 2, height / 2],
    [0.32 * width, height], [-0.32 * width, height], [-width / 2, height / 2]]);
  if (shape == "round") intersection() {
    translate([0, height * 0.45]) ellipse([width / 2, height * 0.55]);
    translate([-width / 2, 0]) rect([width, height]);
  }
}
 
module motif() {
  if (pattern == "sun") {
    outline() circle(r = 10);
    for (a = [0:30:330]) rotate(a) line([14, 0], [22, 0]);
  }
  if (pattern == "tiles") {
    outline() regular_polygon(6, 7);
    for (a = [30:60:330]) translate([13.5 * cos(a), 13.5 * sin(a)]) outline() regular_polygon(6, 7);
  }
  if (pattern == "stars") {
    outline() difference() {
      circle(r = 14);
      translate([7, 4]) circle(r = 12);
    }
    for (p = [[-22, 12, 3], [-20, -12, 2.5], [19, 13, 3.5], [23, -10, 2.5]])
      translate([p[0], p[1]]) outline() star(4, p[2], p[2] * 0.35);
  }
  if (pattern == "leaves") {
    line([0, -21], [0, 22]);
    for (y = [-12, 0, 12], side = [-1, 1]) {
      line([0, y - 3], [side * 11, y + 5]);
      translate([side * 8, y + 3]) rotate(side * 45) outline() ellipse([3.5, 8]);
    }
  }
}
 
module slot(w) rect([w + clearance, t + clearance], center = true);
 
// Assembled: the panel's tab stands in the base's slot
if (output == "sign") {
  part("Panel", at = [0, t / 2, t], rotate = [90, 0, 0]) {
    union() {
      face();
      translate([-tab_width / 2, -tab_depth]) rect([tab_width, tab_depth + 0.5]);
    }
    score() {
      outline() offset(delta = -4) face();
      translate([0, height * 0.67]) scale(motif_scale) motif();
      translate([0, height * 0.31]) text(word, size = 18, fit = width * 0.7, halign = "center", valign = "center");
    }
  }
  part("Base", at = [0, 0, 0]) difference() {
    rect([base_width, base_depth], center = true, r = 8);
    slot(tab_width);
  }
}
 
// The same slot with a 30 mm tab, on two small scraps
if (output == "fit") {
  part("Fit test, base") difference() {
    rect([50, 28], center = true, r = 3);
    slot(30);
  }
  part("Fit test, tab") union() {
    translate([-20, 0]) rect([40, 20], r = 2);
    translate([-15, -tab_depth]) rect([30, tab_depth + 0.5]);
  }
}
 
// Assembly: score first, then cut the slot, then the outlines. Lower the
// panel's tab straight into the slot until its shoulders sit on the base.
// If the fit is loose, or for a sign that stays put, add a little wood glue.