Models / Name sign

Name sign

Name sign: plate sized to the text, with two hanging holes.

The cut file as the downloads lay it out: 105.7 × 52.8 mm, 1 part on 1 sheet. Rendered by KerfScript 0.2.0 from the source below.

Open in playground name-sign.kerf SVG DXF

Parts

Part	Qty	Size
part	1	99.7 × 46.8 mm

Settings

Setting	Default	Range
`name`	`"Atkinson"`
`size`	`22`	10 to 60
`margin`	`8`	4 to 30

Check cut order, power, speed and material settings in your laser software before cutting. Laser software notes

Source 15 lines

// Name sign: plate sized to the text, with two hanging holes.
 
name = "Atkinson"; // Name on the sign
size = 22; // [10:1:60]
margin = 8; // [4:1:30]
 
w = text_width(name, size) + 2 * margin;
h = size * 1.4 + 2 * margin;
 
difference() {
  rect([w, h], r = 6, center = true);
  for (x = [-1, 1]) translate([x * (w / 2 - margin / 2 - 2), h / 2 - margin / 2 - 2]) circle(d = 4);
}
engrave() text(name, size, halign = "center", valign = "center");
score() offset(delta = -2) rect([w, h], r = 6, center = true);