Models / Jewellery tray box
Jewellery tray box
Jewel tray box: an open box, lift-off lid and removable compartment grid. The lid locates on a glued inset plate; it is not a friction-fit hinge. Assembly: glue the box joints and lid layers. Leave the grid removable.
11 parts on 2 sheets, shown together. Each sheet has its own cut file.
Source
// Jewel tray box: an open box, lift-off lid and removable compartment grid.
// The lid locates on a glued inset plate; it is not a friction-fit hinge.
// Assembly: glue the box joints and lid layers. Leave the grid removable.
use <kerf/box>
use <kerf/dividers>
/* [Box] */
width = 210; // [100:5:320]
depth = 145; // [80:5:240]
height = 55; // [35:5:100]
columns = 4; // [1:1:7]
rows = 2; // [1:1:5]
lid_overhang = 4; // [2:1:8]
lid_ease = 0.7; // [0.4:0.1:1.5]
/* [Assembled view] */
// Lift the lid to see the compartments. Cut parts keep their dimensions.
lid_lift = 45; // [0:5:100]
/* [Material] */
$thickness = 3; // [2:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]
clearance = 0.15; // [0:0.05:0.4]
/* [Hidden] */
$material = "plywood";
t = $thickness;
iw = width - 2 * t;
id = depth - 2 * t;
assert(iw / columns > 18 && id / rows > 18, "Compartments must be wider than 18 mm");
assert(height > 5 * t + 8, "Increase height for the lid locator and dividers");
step("Glue the box together") box([width, depth, height]);
step("Drop the compartment grid in, without glue") grid_dividers([iw, id, height - 3 * t - 4], columns, rows, clearance = clearance, scoops = true, at = [t, t, t]);
step("Glue the lid locator under the lid") {
part("Lid", at = [-lid_overhang, -lid_overhang, height + lid_lift]) {
rect([width + 2 * lid_overhang, depth + 2 * lid_overhang], r = 5);
score() translate([lid_overhang + width / 2, lid_overhang + depth / 2]) {
outline() rect([width * 0.6, depth * 0.54], center = true, r = 8);
for (x = [-width * 0.18, 0, width * 0.18]) translate([x, 0]) outline() circle(d = 10);
}
}
part("Lid locator", at = [t + lid_ease, t + lid_ease, height - t + lid_lift])
rect([iw - 2 * lid_ease, id - 2 * lid_ease], r = 3);
}