Models / Business card pocket
Business card pocket
Card pocket: an open-top card tray with a scooped front and a taller back. Interior width and depth follow the cards and stack, with editable ease. Assembly: glue the five finger-jointed panels. Cards are not supplied.
Download size: 382.8 × 61.2 mm. 5 parts on 1 sheet.
Source
// Card pocket: an open-top card tray with a scooped front and a taller back.
// Interior width and depth follow the cards and stack, with editable ease.
// Assembly: glue the five finger-jointed panels. Cards are not supplied.
/* [Cards] */
card_width = 90; // [70:1:160]
stack_depth = 22; // [12:1:60]
back_height = 55; // [40:1:90]
front_height = 24; // [18:1:38]
ease = 2; // [1:0.5:4]
/* [Material] */
$thickness = 3; // [2:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]
/* [Hidden] */
$material = "plywood";
t = $thickness;
w = card_width + 2 * ease + 2 * t;
d = stack_depth + 2 * ease + 2 * t;
assert(back_height > front_height + 8, "Back must rise above the front lip");
assert(front_height >= 3 * t, "Front lip must be at least three sheet thicknesses high");
// Side corners only meet the common lower wall height. The back rises
// above those joints, without fingers exposed along its upper sides.
part("Floor", at = [0, 0, 0]) finger_rect([w, d], "out");
step("Glue the front and back to the floor") {
part("Front", at = [0, t, 0], rotate = [90, 0, 0]) difference() {
finger_rect([w, front_height], ["in", "out", "flat", "out"]);
translate([w / 2, front_height + 5]) ellipse([w * 0.26, 10]);
}
part("Back", at = [0, d, 0], rotate = [90, 0, 0]) union() {
finger_rect([w, front_height], ["in", "out", "flat", "out"]);
translate([t, front_height - 0.1]) rect([w - 2 * t, back_height - front_height + 0.1], r = 2);
}
}
step("Glue the sides in")
part("Side", qty = 2, at = [[0, 0, 0], [w - t, 0, 0]], rotate = [90, 0, 90]) finger_rect([d, front_height], ["in", "in", "flat", "in"]);