Models / Finger-jointed box

Finger-jointed box

Finger-jointed box with a lid.

The cut file as the downloads lay it out: 578.8 × 139.3 mm, 6 parts on 1 sheet. Rendered by KerfScript 0.2.0 from the source below.

Open in playground box.kerf SVG DXF

Parts

Part	Qty	Size
bottom	1	120 × 80 mm
lid	1	120 × 80 mm
front	1	120 × 50 mm
back	1	120 × 50 mm
left	1	80 × 50 mm
right	1	80 × 50 mm

Settings

Setting	Default	Range
`width` Outer width	`120`	40 to 400
`depth` Outer depth	`80`	40 to 400
`height` Outer height	`50`	20 to 300
`lid` Closed box with a lid	`true`	on or off
`$thickness` Sheet thickness	`3`	1.5 to 10
`$kerf` Beam width, compensated on every cut	`0.15`	0 to 0.5

Check cut order, power, speed and material settings in your laser software before cutting. Laser software notes

Source 20 lines

// Finger-jointed box with a lid.
use <kerf/box>
 
/* [Size] */
// Outer width
width = 120; // [40:5:400]
// Outer depth
depth = 80; // [40:5:400]
// Outer height
height = 50; // [20:5:300]
// Closed box with a lid
lid = true;
 
/* [Material] */
// Sheet thickness
$thickness = 3; // [1.5:0.5:10]
// Beam width, compensated on every cut
$kerf = 0.15; // [0:0.01:0.5]
 
box([width, depth, height], lid = lid);