Models / Book brace pair
Book brace pair
Book brace: a bookend pair with tabbed uprights and triangular gussets. The foot extends beneath the books so their weight helps stabilize it. Assembly: glue each upright and gusset into its foot. Add non-slip pads.
Download size: 530.8 × 250.3 mm. 6 parts on 1 sheet.
Source
// Book brace: a bookend pair with tabbed uprights and triangular gussets.
// The foot extends beneath the books so their weight helps stabilize it.
// Assembly: glue each upright and gusset into its foot. Add non-slip pads.
use <kerf/tabs>
/* [Bookends] */
height = 155; // [100:5:230]
width = 110; // [80:5:180]
foot_length = 120; // [90:5:190]
brace_height = 80; // [50:5:100]
/* [Material] */
$thickness = 3; // [2:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]
clearance = 0.15; // [0:0.05:0.4]
/* [Hidden] */
$material = "plywood";
t = $thickness;
assert(brace_height < height - 12, "Gusset must be lower than the upright");
for (k = [0:1]) {
ox = k * (width + 28);
part(str("Foot ", k + 1), at = [ox, 0, 0]) difference() {
rect([width, foot_length], r = 3);
translate([6, 10 + t / 2]) slots(width - 12, clearance = clearance);
translate([width / 2, 10 + t]) rotate(90) slots(foot_length - 24, count = 2, clearance = clearance);
}
step("Glue each upright into its foot")
part(str("Upright ", k + 1), at = [ox + 6, 10 + t, t], rotate = [90, 0, 0])
union() { rect([width - 12, height], r = 4); tabs(width - 12); }
step("Glue a gusset into each foot, behind its upright")
part(str("Gusset ", k + 1), at = [ox + width / 2 - t / 2, 10 + t, t], rotate = [90, 0, 90])
union() {
polygon([[0, 0], [foot_length - 24, 0], [0, brace_height]]);
tabs(foot_length - 24, count = 2);
}
}