// Symbol tags: key rings or bag tags, each with a pictogram and a name. // The symbols come by name from the 867 in kerf/symbols; list them with // symbol_names(), or one category with symbol_names("animals"). The // names fit their tag, and the hole has a ring round it for the key ring. /* [Tags] */ // One tag for each name names = ["MILO", "LUNA", "OSCAR"]; // The symbol on each tag, by name symbols = ["paw", "cat", "dog"]; // Tag width and height size = [70, 30]; // [30:5:120] // Cut the symbols through, or engrave them cut_through = false; /* [Material] */ $thickness = 3; // [2:0.5:6] $kerf = 0.15; // [0:0.01:0.3] /* [Hidden] */ use use $fn = 48; $material = "plywood"; w = size[0]; h = size[1]; s = h * 0.62; assert(len(symbols) >= len(names), "Give a symbol for every name"); for (i = [0:len(names) - 1]) part(str("Tag ", names[i]), at = [0, -i * (h + 10), 0]) { difference() { hanging_loop([5, h / 2], d = 5, wall = 3) rect([w, h], r = h * 0.3); if (cut_through) translate([14 + s / 2, h / 2]) symbol(symbols[i], s); } engrave() { if (!cut_through) translate([14 + s / 2, h / 2]) symbol(symbols[i], s); translate([(w + 14 + s) / 2 + 2, h / 2]) text(names[i], size = h * 0.4, fit = w - s - 22, halign = "center", valign = "center"); } }