> Canonical HTML: https://kerfscript.mylasertools.com/models/symbol-tags/

# Symbol name tags

Symbol tags: key rings or bag tags, each with a pictogram and a name. The symbols come by name from the 867 in kerf/symbols; list them with symbol_names(), or one category with symbol_names("animals"). The names fit their tag, and the hole has a ring round it for the key ring.

This design has 3 parts on 1 sheet. Customize it in the [playground](https://kerfscript.mylasertools.com/playground/?model=symbol-tags).

## Downloads

- [KerfScript source](https://kerfscript.mylasertools.com/models/symbol-tags/symbol-tags.kerf)
- [SVG](https://kerfscript.mylasertools.com/models/symbol-tags/symbol-tags.svg)
- [DXF](https://kerfscript.mylasertools.com/models/symbol-tags/symbol-tags.dxf)

## Parts

| Part | Quantity | Size |
| --- | ---: | --- |
| Tag MILO | 1 | 70.5 × 30 mm |
| Tag LUNA | 1 | 70.5 × 30 mm |
| Tag OSCAR | 1 | 70.5 × 30 mm |

## Settings

| Name | Default | Range or choices |
| --- | --- | --- |
| `size` | `[70,30]` | 30 to 120 |
| `cut_through` | `false` | on or off |
| `$thickness` | `3` | 2 to 6 |
| `$kerf` | `0.15` | 0 to 0.3 |

## Source

```kerf
// Symbol tags: key rings or bag tags, each with a pictogram and a name.
// The symbols come by name from the 867 in kerf/symbols; list them with
// symbol_names(), or one category with symbol_names("animals"). The
// names fit their tag, and the hole has a ring round it for the key ring.

/* [Tags] */
// One tag for each name
names = ["MILO", "LUNA", "OSCAR"];
// The symbol on each tag, by name
symbols = ["paw", "cat", "dog"];
// Tag width and height
size = [70, 30]; // [30:5:120]
// Cut the symbols through, or engrave them
cut_through = false;

/* [Material] */
$thickness = 3; // [2:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]

/* [Hidden] */
use <kerf/symbols>
use <kerf/hanging>
$fn = 48;
$material = "plywood";
w = size[0];
h = size[1];
s = h * 0.62;
assert(len(symbols) >= len(names), "Give a symbol for every name");
for (i = [0:len(names) - 1]) part(str("Tag ", names[i]), at = [0, -i * (h + 10), 0]) {
  difference() {
    hanging_loop([5, h / 2], d = 5, wall = 3) rect([w, h], r = h * 0.3);
    if (cut_through) translate([14 + s / 2, h / 2]) symbol(symbols[i], s);
  }
  engrave() {
    if (!cut_through) translate([14 + s / 2, h / 2]) symbol(symbols[i], s);
    translate([(w + 14 + s) / 2 + 2, h / 2]) text(names[i], size = h * 0.4, fit = w - s - 22, halign = "center", valign = "center");
  }
}
```

Set power, speed and cut order in your laser software. See the [laser software guide](https://kerfscript.mylasertools.com/docs/compatibility/index.md).
