// Slide grid: a solvably shuffled sliding puzzle with a removable clear retainer. // Circular finger ports let tiles slide beneath the cover while keeping them in. // Assembly: glue the plywood spacer to the floor. Add tiles, then bolt the // acrylic cover on with thin washers for vertical play. Undo it to change tiles. /* [Puzzle] */ columns = 4; // [3:1:6] rows = 4; // [3:1:6] tile_size = 30; // [24:1:45] shuffle_steps = 32; // [0:1:80] seed = 7; // [1:1:99] numbers = true; /* [Assembled view] */ // Slide one adjacent tile into the blank, and back, without changing the cut. tile_slide = 0; // [0:0.05:1] /* [Fit] */ slide_gap = 0.4; // [0.2:0.05:0.8] vertical_play = 0.3; // [0.2:0.05:0.6] cover_thickness = 2; // [1.5:0.5:3] bolt_diameter = 3; // [3:0.5:4] /* [Material] */ $thickness = 3; // [2:0.5:6] $kerf = 0.15; // [0:0.01:0.3] /* [Hidden] */ $material = "plywood"; t = $thickness; border = 12; pitch = tile_size + slide_gap; iw = columns * pitch + slide_gap; id = rows * pitch + slide_gap; w = iw + 2 * border; d = id + 2 * border; cells = columns * rows; assert(tile_slide >= 0 && tile_slide <= 1, "Tile slide must stay between neighbouring cells"); function swapped(v, a, b) = [for (i = [0:len(v) - 1]) i == a ? v[b] : i == b ? v[a] : v[i]]; function shuffled(v, empty, n) = n <= 0 ? v : let ( choices = [for (i = [0:cells - 1]) if (abs(i % columns - empty % columns) + abs(floor(i / columns) - floor(empty / columns)) == 1) i], pick = choices[min(len(choices) - 1, floor(rands(0, len(choices), 1, seed + n)[0]))]) shuffled(swapped(v, empty, pick), pick, n - 1); values = shuffled(concat([for (i = [1:cells - 1]) i], [0]), cells - 1, shuffle_steps); empty = [for (i = [0:cells - 1]) if (values[i] == 0) i][0]; moving = [for (i = [0:cells - 1]) if (abs(i % columns - empty % columns) + abs(floor(i / columns) - floor(empty / columns)) == 1) i][0]; function location(i) = [border + slide_gap + (i % columns) * pitch, border + slide_gap + floor(i / columns) * pitch, t]; module screw_holes() for (x = [border / 2, w - border / 2], y = [border / 2, d - border / 2]) translate([x, y]) circle(d = bolt_diameter + 0.3); module plate() difference() { rect([w, d], r = 4); screw_holes(); } module numeral(n, size) { digits = [[0, 1, 2, 3, 4, 5], [1, 2], [0, 1, 6, 4, 3], [0, 1, 6, 2, 3], [5, 6, 1, 2], [0, 5, 6, 2, 3], [0, 5, 4, 3, 2, 6], [0, 1, 2], [0, 1, 2, 3, 4, 5, 6], [0, 1, 2, 3, 5, 6]]; strokes = [[[0, 2], [1, 2]], [[1, 2], [1, 1]], [[1, 1], [1, 0]], [[0, 0], [1, 0]], [[0, 1], [0, 0]], [[0, 2], [0, 1]], [[0, 1], [1, 1]]]; scale(size / 2) for (k = digits[n]) line(strokes[k][0], strokes[k][1]); } step("Glue the spacer onto the floor") { part("Floor", at = [0, 0, 0]) plate(); part("Cavity spacer", at = [0, 0, t]) difference() { plate(); translate([border, border]) rect([iw, id], r = 1); } } step("Set the tiles in the tray") for (i = [0:cells - 1]) if (values[i] > 0) part(str("Tile ", values[i]), at = location(i) + (i == moving ? (location(empty) - location(i)) * tile_slide : [0, 0, 0])) { rect([tile_size, tile_size], r = 1); if (numbers) score() translate([tile_size / 2, tile_size / 2]) { if (values[i] >= 10) { translate([-7, -5]) numeral(floor(values[i] / 10), 10); translate([1, -5]) numeral(values[i] % 10, 10); } else translate([-2.5, -5]) numeral(values[i], 10); } } step("Bolt the clear retainer on, with thin washers for a little play") material(thickness = cover_thickness, name = "clear acrylic") part("Clear retainer", at = [0, 0, 2 * t + vertical_play]) difference() { plate(); for (i = [0:cells - 1]) translate([location(i)[0] + tile_size / 2, location(i)[1] + tile_size / 2]) circle(d = tile_size * 0.64); }