> Canonical HTML: https://kerfscript.mylasertools.com/models/ring-vase/

# Stacked ring vase

Ring vase: a vase of stacked rings threaded on two crossed core plates, its outline a smooth curve from the foot to the lip. Rings of the same size are one part, so the cut list stays short. The base cuts its own slots for the core's feet. A glass test tube or a dried posy goes inside. Made with ring_stack() from kerf/rings.

This design has 53 parts on 2 sheets. Customize it in the [playground](https://kerfscript.mylasertools.com/playground/?model=ring-vase).

## Downloads

- [KerfScript source](https://kerfscript.mylasertools.com/models/ring-vase/ring-vase.kerf)
- [ring-vase-sheet-1.svg](https://kerfscript.mylasertools.com/models/ring-vase/ring-vase-sheet-1.svg)
- [ring-vase-sheet-1.dxf](https://kerfscript.mylasertools.com/models/ring-vase/ring-vase-sheet-1.dxf)
- [ring-vase-sheet-2.svg](https://kerfscript.mylasertools.com/models/ring-vase/ring-vase-sheet-2.svg)
- [ring-vase-sheet-2.dxf](https://kerfscript.mylasertools.com/models/ring-vase/ring-vase-sheet-2.dxf)

## Parts

| Part | Quantity | Size |
| --- | ---: | --- |
| Base | 1 | 79 × 79 mm |
| Vase 63 | 2 | 63 × 63 mm |
| Vase 65 | 2 | 65 × 65 mm |
| Vase 67 | 1 | 67 × 67 mm |
| Vase 69 | 1 | 69 × 69 mm |
| Vase 71 | 1 | 71 × 71 mm |
| Vase 73 | 1 | 73 × 73 mm |
| Vase 75 | 1 | 75 × 75 mm |
| Vase 78 | 2 | 78 × 78 mm |
| Vase 80 | 2 | 80 × 80 mm |
| Vase 82 | 2 | 82 × 82 mm |
| Vase 84 | 2 | 84 × 84 mm |
| Vase 85 | 2 | 85 × 85 mm |
| Vase 87 | 2 | 87 × 87 mm |
| Vase 88 | 2 | 88 × 88 mm |
| Vase 89 | 2 | 89 × 89 mm |
| Vase 90 | 4 | 90 × 90 mm |
| Vase 76 | 1 | 76 × 76 mm |
| Vase 74 | 1 | 74 × 74 mm |
| Vase 72 | 1 | 72 × 72 mm |
| Vase 70 | 1 | 70 × 70 mm |
| Vase 68 | 1 | 68 × 68 mm |
| Vase 61 | 1 | 61 × 61 mm |
| Vase 59 | 1 | 59 × 59 mm |
| Vase 57 | 1 | 57 × 57 mm |
| Vase 55 | 2 | 55 × 55 mm |
| Vase 53 | 2 | 53 × 53 mm |
| Vase 51 | 2 | 51 × 51 mm |
| Vase 50 | 2 | 50 × 50 mm |
| Vase 49 | 3 | 49 × 49 mm |
| Vase 48 | 1 | 48 × 48 mm |
| Vase 56 | 1 | 56 × 56 mm |
| Vase core A | 1 | 33.7 × 153 mm |
| Vase core B | 1 | 33.7 × 153 mm |

## Settings

| Name | Default | Range or choices |
| --- | --- | --- |
| `height` | `150` | 90 to 260 |
| `belly` | `90` | 60 to 160 |
| `belly_at` | `0.35` | 0.2 to 0.7 |
| `neck` | `50` | 40 to 120 |
| `hole` | `34` | 24 to 60 |
| `$thickness` | `3` | 2 to 6 |
| `$kerf` | `0.15` | 0 to 0.3 |

## Source

```kerf
// Ring vase: a vase of stacked rings threaded on two crossed core plates,
// its outline a smooth curve from the foot to the lip. Rings of the same
// size are one part, so the cut list stays short. The base cuts its own slots
// for the core's feet. A glass test tube or a dried posy goes inside. Made
// with ring_stack() from kerf/rings.

/* [Vase] */
// Height
height = 150; // [90:5:260]
// Widest, at the belly
belly = 90; // [60:5:160]
// Where the belly is, from the foot up (0 to 1)
belly_at = 0.35; // [0.2:0.05:0.7]
// Neck and lip
neck = 50; // [40:5:120]
// The hole through every ring, for a glass tube
hole = 34; // [24:1:60]

/* [Material] */
$thickness = 3; // [2:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]

/* [Hidden] */
use <kerf/rings>
$fn = 72;
$material = "plywood";
t = $thickness;
n = max(6, round(height / t));
// The outline through the foot, the belly, the neck and the lip
profile = spline_points([[0, belly * 0.7], [belly_at * n, belly], [0.8 * n, neck], [n - 1, neck * 1.12]], 8);
function width_at(k) = lookup(k, profile);
assert(neck > hole + 8, "Make the neck wider or the hole smaller");
step("Slide the two core plates together and stand them in the base")
  part("Base", at = [0, 0, -t], slots = ["Vase core A", "Vase core B"]) circle(d = belly * 0.7 + 16);
// Each ring rounded to the nearest millimetre, so alike rings share a part
step("Thread the rings over the core, biggest at the belly, gluing each to the one below")
  ring_stack([for (k = [0:n - 1]) round(width_at(k))], hole, name = "Vase");
```

Set power, speed and cut order in your laser software. See the [laser software guide](https://kerfscript.mylasertools.com/docs/compatibility/index.md).
