// Ribbon rail: a pair of uprights hold a removable wooden dowel over a base. // Spool count and width set the space between uprights. Dowel not included. // Assembly: glue the uprights into the base; pass the dowel through both. use /* [Spools] */ spools = 5; // [1:1:10] spool_width = 28; // [15:1:55] spool_diameter = 75; // [40:5:120] dowel_diameter = 8; // [6:1:14] spool_gap = 3; // [2:1:8] /* [Material] */ $thickness = 3; // [2:0.5:6] $kerf = 0.15; // [0:0.01:0.3] clearance = 0.15; // [0:0.05:0.4] /* [Hidden] */ $material = "plywood"; t = $thickness; span = spools * (spool_width + spool_gap) + spool_gap; depth = spool_diameter + 24; axle_height = spool_diameter / 2 + 12; height = axle_height + dowel_diameter / 2 + 14; part("Base", at = [-8, -8, 0]) difference() { rect([span + 2 * t + 16, depth + 16], r = 5); for (x = [8 + t / 2, 8 + span + 1.5 * t]) translate([x, 8]) rotate(90) slots(depth, clearance = clearance); } part("Axle support", qty = 2, at = [[0, 0, t], [span + t, 0, t]], rotate = [90, 0, 90]) difference() { union() { rect([depth, height], r = 5); tabs(depth); } translate([depth / 2, axle_height]) circle(d = dowel_diameter + 0.6); } // Cut a dowel to span + 2 * thickness + 20 mm. A collar at each end // prevents it sliding out. The 3D model contains the cut sheet parts only.