> Canonical HTML: https://kerfscript.mylasertools.com/models/ribbon-rail/

# Ribbon spool rail

Ribbon rail: a pair of uprights hold a removable wooden dowel over a base. Spool count and width set the space between uprights. Dowel not included. Assembly: glue the uprights into the base; pass the dowel through both.

This design has 3 parts on 1 sheet. Customize it in the [playground](https://kerfscript.mylasertools.com/playground/?model=ribbon-rail).

## Downloads

- [KerfScript source](https://kerfscript.mylasertools.com/models/ribbon-rail/ribbon-rail.kerf)
- [SVG](https://kerfscript.mylasertools.com/models/ribbon-rail/ribbon-rail.svg)
- [DXF](https://kerfscript.mylasertools.com/models/ribbon-rail/ribbon-rail.dxf)

## Parts

| Part | Quantity | Size |
| --- | ---: | --- |
| Base | 1 | 180 × 115 mm |
| Axle support | 2 | 99 × 70.5 mm |

## Settings

| Name | Default | Range or choices |
| --- | --- | --- |
| `spools` | `5` | 1 to 10 |
| `spool_width` | `28` | 15 to 55 |
| `spool_diameter` | `75` | 40 to 120 |
| `dowel_diameter` | `8` | 6 to 14 |
| `spool_gap` | `3` | 2 to 8 |
| `$thickness` | `3` | 2 to 6 |
| `$kerf` | `0.15` | 0 to 0.3 |
| `clearance` | `0.15` | 0 to 0.4 |

## Source

```kerf
// Ribbon rail: a pair of uprights hold a removable wooden dowel over a base.
// Spool count and width set the space between uprights. Dowel not included.
// Assembly: glue the uprights into the base; pass the dowel through both.

use <kerf/tabs>

/* [Spools] */
spools = 5; // [1:1:10]
spool_width = 28; // [15:1:55]
spool_diameter = 75; // [40:5:120]
dowel_diameter = 8; // [6:1:14]
spool_gap = 3; // [2:1:8]

/* [Material] */
$thickness = 3; // [2:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]
clearance = 0.15; // [0:0.05:0.4]

/* [Hidden] */
$material = "plywood";
t = $thickness;
span = spools * (spool_width + spool_gap) + spool_gap;
depth = spool_diameter + 24;
axle_height = spool_diameter / 2 + 12;
height = axle_height + dowel_diameter / 2 + 14;
part("Base", at = [-8, -8, 0]) difference() {
  rect([span + 2 * t + 16, depth + 16], r = 5);
  for (x = [8 + t / 2, 8 + span + 1.5 * t]) translate([x, 8]) rotate(90) slots(depth, clearance = clearance);
}
part("Axle support", qty = 2, at = [[0, 0, t], [span + t, 0, t]], rotate = [90, 0, 90]) difference() {
  union() { rect([depth, height], r = 5); tabs(depth); }
  translate([depth / 2, axle_height]) circle(d = dowel_diameter + 0.6);
}
// Cut a dowel to span + 2 * thickness + 20 mm. A collar at each end
// prevents it sliding out. The 3D model contains the cut sheet parts only.
```

Set power, speed and cut order in your laser software. See the [laser software guide](https://kerfscript.mylasertools.com/docs/compatibility/index.md).
