// Post sorter: a row of tabbed dividers with a rising top line. // Bay clearance and bay count set the base depth automatically. // Assembly: glue each divider into the matching slots in the base. use /* [Storage] */ width = 220; // [150:5:340] bays = 3; // [1:1:6] bay_gap = 35; // [20:5:65] front_height = 65; // [45:5:100] rise = 22; // [0:1:30] /* [Material] */ $thickness = 3; // [2:0.5:6] $kerf = 0.15; // [0:0.01:0.3] clearance = 0.15; // [0:0.05:0.4] /* [Hidden] */ $material = "plywood"; t = $thickness; margin = 10; depth = 2 * margin + (bays + 1) * t + bays * bay_gap; span = width - 2 * margin; step("Lay the base flat") part("Base", at = [0, 0, 0]) difference() { rect([width, depth], r = 4); for (i = [0:bays]) translate([margin, margin + t / 2 + i * (bay_gap + t)]) slots(span, clearance = clearance); } step("Glue each divider into its slots in the base") for (i = [0:bays]) part(str("Divider ", i + 1), at = [margin, margin + t + i * (bay_gap + t), t], rotate = [90, 0, 0]) difference() { union() { rect([span, front_height + rise * i], r = 4); tabs(span); } translate([span / 2, front_height + rise * i]) ellipse([span * 0.25, 13]); }