// Pocket valet: a shallow tray with a removable key and watch perch. // A tabbed upright holds a horizontal shelf with open key-ring notches. // Assembly: glue the tray and upright joints; add felt if desired. use /* [Valet] */ width = 220; // [150:5:320] depth = 140; // [100:5:220] tray_height = 28; // [20:2:45] perch_height = 110; // [80:5:160] keys = 4; // [2:1:7] /* [Material] */ $thickness = 3; // [2:0.5:6] $kerf = 0.15; // [0:0.01:0.3] clearance = 0.15; // [0:0.05:0.4] /* [Hidden] */ $material = "plywood"; t = $thickness; span = width - 24; wall_at = depth - 24; reach = 28; step("Glue the walls into the floor") { part("Floor", at = [0, 0, 0]) difference() { finger_rect([width, depth], "out"); translate([12, wall_at]) slots(span, clearance = clearance); } part("Long wall", qty = 2, at = [[0, t, 0], [0, depth, 0]], rotate = [90, 0, 0]) finger_rect([width, tray_height], ["in", "out", "flat", "out"]); part("End wall", qty = 2, at = [[0, 0, 0], [width - t, 0, 0]], rotate = [90, 0, 90]) finger_rect([depth, tray_height], ["in", "in", "flat", "in"]); } step("Glue the upright into the floor") part("Perch upright", at = [12, wall_at + t / 2, t], rotate = [90, 0, 0]) difference() { union() { rect([span, perch_height + 10], r = 3); tabs(span); } translate([0, perch_height + t / 2]) slots(span, clearance = clearance); } step("Glue the key perch into the upright") part("Key perch", at = [12, wall_at - t / 2 - reach, t + perch_height]) difference() { tab_rect([span, reach], [false, false, true, false]); for (i = [0:keys - 1]) translate([span * (i + 0.5) / keys, 0]) rect([5, 18], center = true, r = 2); } // Rear-edge tabs pass through the upright into free space behind it.