> Canonical HTML: https://kerfscript.mylasertools.com/models/plant-plinth/

# Plant display plinth

Plant plinth: two crossing half-lapped frames support a circular top. Pot diameter sets the top and footprint; height sets the support frames. Assembly: cross the frames at their half-depth slots and glue on the top. Use as a small display stand after checking the material's load capacity.

This design has 3 parts on 1 sheet. Customize it in the [playground](https://kerfscript.mylasertools.com/playground/?model=plant-plinth).

## Downloads

- [KerfScript source](https://kerfscript.mylasertools.com/models/plant-plinth/plant-plinth.kerf)
- [SVG](https://kerfscript.mylasertools.com/models/plant-plinth/plant-plinth.svg)
- [DXF](https://kerfscript.mylasertools.com/models/plant-plinth/plant-plinth.dxf)

## Parts

| Part | Quantity | Size |
| --- | ---: | --- |
| Frame A | 1 | 107.2 × 85 mm |
| Frame B | 1 | 107.2 × 85 mm |
| Top | 1 | 134 × 134 mm |

## Settings

| Name | Default | Range or choices |
| --- | --- | --- |
| `pot_diameter` | `110` | 70 to 180 |
| `height` | `85` | 50 to 150 |
| `rim` | `12` | 8 to 20 |
| `leg_width` | `22` | 16 to 35 |
| `$thickness` | `4` | 3 to 6 |
| `$kerf` | `0.15` | 0 to 0.3 |
| `clearance` | `0.15` | 0 to 0.4 |

## Source

```kerf
// Plant plinth: two crossing half-lapped frames support a circular top.
// Pot diameter sets the top and footprint; height sets the support frames.
// Assembly: cross the frames at their half-depth slots and glue on the top.
// Use as a small display stand after checking the material's load capacity.

/* [Stand] */
pot_diameter = 110; // [70:5:180]
height = 85; // [50:5:150]
rim = 12; // [8:1:20]
leg_width = 22; // [16:1:35]

/* [Material] */
$thickness = 4; // [3:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]
clearance = 0.15; // [0:0.05:0.4]

/* [Hidden] */
$material = "plywood";
t = $thickness;
diameter = pot_diameter + 2 * rim;
span = diameter * 0.8;
assert(span > 3 * leg_width + 8, "Reduce leg width or enlarge the top");
assert(height > leg_width + 12, "Increase height to leave a clear opening");
module frame(top_slot = false) difference() {
  rect([span, height]);
  window = (span - 3 * leg_width) / 2;
  for (x = [leg_width, 2 * leg_width + window]) translate([x, height * 0.2]) rect([window, height * 0.5], r = 3);
  translate([span / 2 - (t + clearance) / 2, top_slot ? height / 2 : -1]) rect([t + clearance, height / 2 + 1]);
}
step("Cross the two frames at their half-depth slots") {
  part("Frame A", at = [-span / 2, t / 2, 0], rotate = [90, 0, 0]) frame(true);
  part("Frame B", at = [-t / 2, -span / 2, 0], rotate = [90, 0, 90]) frame(false);
}
step("Glue the top on")
  part("Top", at = [0, 0, height]) circle(d = diameter);
```

Set power, speed and cut order in your laser software. See the [laser software guide](https://kerfscript.mylasertools.com/docs/compatibility/index.md).
