// Morph: one program, five sculptures. Flat contour layers stack on three // dowels, with spacer plates between them; only each layer's outline turns // and swells, so the stack becomes a bowl, an urn, a twisted tower, a lotus // or a saddle. Pick a form, or choose custom and shape your own. /* [Form] */ // A ready recipe, or custom to use the settings below preset = "helix"; // [bowl:Tide bowl, urn:Seed urn, helix:Helix tower, lotus:Lotus bloom, saddle:Saddle vessel, custom:Custom] // All parts, or one group at a time output = "all"; // [all:All parts, layers:Two layers, spacers:Spacer plates, base:Bottom cover, fit:Dowel fit test, single:One layer] // Which pair of layers (Two layers), or which layer (One layer) batch = 1; // [1:1:28] // Scored layer numbers and the arrow that lines the layers up score_detail = true; /* [Custom profile] */ // Outer radius at the bottom, belly, neck and mouth profile = [48, 55, 48, 52]; // Height of the belly, as a share of the total belly_at = 0.42; // [0.25:0.01:0.65] // Contour layers layer_count = 28; // [10:1:28] // Spacer plates between two layers: 0 dense, 1 airy, 2 very open spacers_per_gap = 2; // [0, 1, 2] /* [Custom section] */ // Shape of each layer: 2 circle, 4 rounded square, 5 squarer section_power = 4; // [2:0.1:5] // Stretch one way before turning stretch = 1.12; // [1:0.01:1.2] // Petals around each layer lobe_count = 6; // [3:1:10] // Petal depth, as a share of the radius (0 for none) lobe_depth = 0; // [0:0.01:0.3] // Total turn from bottom to top, in degrees twist = 150; // [-180:1:180] // Width of the outer rim rim_width = 11; // [9:1:16] // Spokes between the rim and the hub spoke_count = 3; // [3, 6, 9] // Open windows between hub and rim, or solid layers open_windows = true; // Hole down the middle bore = 32; // [20:1:32] /* [Material] */ // Sheet thickness; also sets the height of the stack $thickness = 3; // [2.8:0.1:3.2] // Measured diameter of the three wooden dowels dowel_diameter = 6; // [5.8:0.05:6.2] // Added to the dowel holes, for a glued fit dowel_clearance = 0.25; // [0.15:0.05:0.35] // Beam width $kerf = 0.15; // [0:0.01:0.25] /* [Hidden] */ $material = "plywood"; $sheet = [600, 400]; $gap = 6; $fn = 120; // Each recipe: [profile, belly_at, layers, spacers, section, stretch, lobes, // lobe depth, twist, rim, spokes, windows, bore] recipes = [ [[52, 82, 95, 96], 0.40, 12, 1, 2, 1, 8, 0.10, 0, 11, 3, true, 32], [[52, 90, 55, 46], 0.46, 24, 1, 2, 1, 6, 0, 0, 12, 6, true, 28], [[48, 55, 48, 52], 0.42, 28, 2, 4, 1.12, 6, 0, 150, 11, 3, true, 32], [[48, 64, 88, 95], 0.35, 16, 1, 2, 1, 6, 0.28, -18, 10, 6, true, 32], [[78, 46, 53, 80], 0.48, 22, 1, 5, 1, 4, 0, -70, 12, 3, false, 30] ]; keys = ["bowl", "urn", "helix", "lotus", "saddle"]; p = preset == "custom" ? [profile, belly_at, layer_count, spacers_per_gap, section_power, stretch, lobe_count, lobe_depth, twist, rim_width, spoke_count, open_windows, bore] : recipes[search(preset, keys)]; pr = p[0]; peak = p[1]; N = p[2]; S = p[3]; power = p[4]; elong = p[5]; lobes = p[6]; depth = p[7]; turn = p[8]; rim = p[9]; spokes = p[10]; windows = p[11]; opening = p[12]; t = $thickness; hd = dowel_diameter + dowel_clearance; // Three dowels at unequal angles, so a layer only fits one way round pin_angles = [0, 120, 235]; pin_r = 24; hub = 31; stack_h = (N + (N - 1) * S) * t; foot_r = max(55, 0.28 * (stack_h + t)); echo("Three dowels, each", stack_h + t, "mm long"); function ease(a, b, v) = lerp(a, b, (1 - cos(180 * v)) / 2); // Outer radius at height v (0 to 1), through the four profile radii function radius(v) = v <= peak ? ease(pr[0], pr[1], v / peak) : v <= 0.82 ? ease(pr[1], pr[2], (v - peak) / (0.82 - peak)) : ease(pr[2], pr[3], (v - 0.82) / 0.18); function polar(r, a) = [r * cos(a), r * sin(a)]; // The outline at height v, angle a: a superellipse with petals, stretched and turned function point(v, a) = let ( r = radius(v) * (1 + depth * (1 + cos(lobes * a)) / 2) / pow(pow(abs(cos(a)), power) + pow(abs(sin(a)), power), 1 / power), x = elong * r * cos(a), y = r * sin(a), q = turn * v ) [x * cos(q) - y * sin(q), x * sin(q) + y * cos(q)]; module contour(i) polygon([for (j = [0:359]) point(i / (N - 1), j)]); module holes() for (a = pin_angles) translate(polar(pin_r, a)) circle(d = hd); module hub_blank() difference() { circle(r = hub); circle(d = opening); } // Two-digit numbers in single strokes, so the file needs no font segments = [[[0, 4], [2, 4]], [[2, 4], [2, 2]], [[2, 2], [2, 0]], [[0, 0], [2, 0]], [[0, 0], [0, 2]], [[0, 2], [0, 4]], [[0, 2], [2, 2]]]; digits = [[0, 1, 2, 3, 4, 5], [1, 2], [0, 1, 6, 4, 3], [0, 1, 6, 2, 3], [5, 6, 1, 2], [0, 5, 6, 2, 3], [0, 5, 6, 4, 2, 3], [0, 1, 2], [0, 1, 2, 3, 4, 5, 6], [0, 1, 2, 3, 5, 6]]; module number(n) for (k = [0:1]) translate([k * 3, 0]) for (s = digits[k == 0 ? floor(n / 10) : n % 10]) line(segments[s][0], segments[s][1]); module slab(i) { difference() { if (i == 0 || !windows) contour(i); else union() { difference() { contour(i); offset(delta = -rim) contour(i); } hub_blank(); intersection() { contour(i); for (a = [0:360 / spokes:359]) rotate(a) translate([22, -4]) rect([180, 8]); } } holes(); if (i > 0) circle(d = opening); } if (score_detail) score() { translate([18, 7]) number(i + 1); // Points at the dowel at 0 degrees on every layer polyline([[17, -7], [28, -7], [25, -9]]); } } module spacer() difference() { hub_blank(); holes(); } module foot() { circle(r = foot_r); if (score_detail) score() { // Targets that show through layer 1's holes, to centre it for (a = pin_angles) translate(polar(pin_r, a)) { line([-2, 0], [2, 0]); line([0, -2], [0, 2]); } line([-4, 0], [4, 0]); line([0, -4], [0, 4]); } } module fit_test() { part("Fit test, dowel holes") { difference() { rect([100, 30], r = 2); for (j = [0:3]) translate([14 + 24 * j, 15]) circle(d = dowel_diameter + 0.1 + j * 0.1); } if (score_detail) score() for (j = [0:3]) translate([11 + 24 * j, 23]) number(j + 1); } part("Fit test, hub") spacer(); } // Assembled: the bottom cover, then each layer with its spacers above it pitch = (1 + S) * t; function layer_z(i) = t + i * pitch; // Name the bottom cover's step first, since it goes on first if (output == "all") step("Glue the bottom cover onto the three dowels") {} step("Stack each layer and its spacers on the dowels, scored faces up and arrows lined up") { if (output == "all" || output == "layers") for (i = [0:N - 1]) if (output == "all" || floor(i / 2) == batch - 1) part(str("Layer ", i + 1), at = [0, 0, layer_z(i)]) slab(i); if (output == "single" && batch <= N) part(str("Layer ", batch), at = [0, 0, layer_z(batch - 1)]) slab(batch - 1); if ((output == "all" || output == "spacers") && S > 0) part("Spacer", qty = (N - 1) * S, at = [for (g = [0:N - 2], j = [0:S - 1]) [0, 0, layer_z(g) + t + j * t]]) spacer(); } if (output == "all" || output == "base") step("Glue the bottom cover onto the three dowels") part("Bottom cover", at = [0, 0, 0]) foot(); if (output == "fit") fit_test(); // Assembly: cut the fit test first and set dowel_clearance from it. Stack // the bottom cover, layer 1, the spacers, layer 2 and so on, all scored faces // up and the arrows lined up, on the three dowels. Glue as you go and trim // the dowels flush with the top layer.