> Canonical HTML: https://kerfscript.mylasertools.com/models/game-insert/

# Lift-out game box insert

Game insert: lift-out card trays and token bins fill a measured game box. Card dimensions constrain the front bank; token bins fill the remaining area. Assembly: glue each bin separately. Leave all bins loose on the carrier floor. No game-specific artwork or component shapes are used.

This design has 46 parts on 2 sheets. Customize it in the [playground](https://kerfscript.mylasertools.com/playground/?model=game-insert).

## Downloads

- [KerfScript source](https://kerfscript.mylasertools.com/models/game-insert/game-insert.kerf)
- [game-insert-sheet-1.svg](https://kerfscript.mylasertools.com/models/game-insert/game-insert-sheet-1.svg)
- [game-insert-sheet-1.dxf](https://kerfscript.mylasertools.com/models/game-insert/game-insert-sheet-1.dxf)
- [game-insert-sheet-2.svg](https://kerfscript.mylasertools.com/models/game-insert/game-insert-sheet-2.svg)
- [game-insert-sheet-2.dxf](https://kerfscript.mylasertools.com/models/game-insert/game-insert-sheet-2.dxf)

## Parts

| Part | Quantity | Size |
| --- | ---: | --- |
| Carrier floor | 1 | 297 × 247 mm |
| Card tray 1 floor | 1 | 97.4 × 102 mm |
| Card tray 1 front | 1 | 97.4 × 38 mm |
| Card tray 1 back | 1 | 97.4 × 38 mm |
| Card tray 1 side | 2 | 102 × 38 mm |
| Card tray 2 floor | 1 | 97.4 × 102 mm |
| Card tray 2 front | 1 | 97.4 × 38 mm |
| Card tray 2 back | 1 | 97.4 × 38 mm |
| Card tray 2 side | 2 | 102 × 38 mm |
| Card tray 3 floor | 1 | 97.4 × 102 mm |
| Card tray 3 front | 1 | 97.4 × 38 mm |
| Card tray 3 back | 1 | 97.4 × 38 mm |
| Card tray 3 side | 2 | 102 × 38 mm |
| Token bin 1 floor | 1 | 97.4 × 70.1 mm |
| Token bin 1 front | 1 | 97.4 × 28 mm |
| Token bin 1 back | 1 | 97.4 × 28 mm |
| Token bin 1 side | 2 | 70.1 × 28 mm |
| Token bin 4 floor | 1 | 97.4 × 70.1 mm |
| Token bin 4 front | 1 | 97.4 × 28 mm |
| Token bin 4 back | 1 | 97.4 × 28 mm |
| Token bin 4 side | 2 | 70.1 × 28 mm |
| Token bin 2 floor | 1 | 97.4 × 70.1 mm |
| Token bin 2 front | 1 | 97.4 × 28 mm |
| Token bin 2 back | 1 | 97.4 × 28 mm |
| Token bin 2 side | 2 | 70.1 × 28 mm |
| Token bin 5 floor | 1 | 97.4 × 70.1 mm |
| Token bin 5 front | 1 | 97.4 × 28 mm |
| Token bin 5 back | 1 | 97.4 × 28 mm |
| Token bin 5 side | 2 | 70.1 × 28 mm |
| Token bin 3 floor | 1 | 97.4 × 70.1 mm |
| Token bin 3 front | 1 | 97.4 × 28 mm |
| Token bin 3 back | 1 | 97.4 × 28 mm |
| Token bin 3 side | 2 | 70.1 × 28 mm |
| Token bin 6 floor | 1 | 97.4 × 70.1 mm |
| Token bin 6 front | 1 | 97.4 × 28 mm |
| Token bin 6 back | 1 | 97.4 × 28 mm |
| Token bin 6 side | 2 | 70.1 × 28 mm |

## Settings

| Name | Default | Range or choices |
| --- | --- | --- |
| `box_width` | `300` | 180 to 420 |
| `box_depth` | `250` | 180 to 380 |
| `box_height` | `65` | 40 to 100 |
| `box_ease` | `1.5` | 1 to 3 |
| `card_width` | `66` | 45 to 90 |
| `card_length` | `92` | 65 to 130 |
| `deck_count` | `3` | 1 to 5 |
| `stack_height` | `35` | 20 to 65 |
| `card_ease` | `2` | 1 to 4 |
| `token_columns` | `3` | 1 to 6 |
| `token_rows` | `2` | 1 to 4 |
| `token_height` | `28` | 18 to 50 |
| `$thickness` | `3` | 2 to 6 |
| `$kerf` | `0.15` | 0 to 0.3 |

## Source

```kerf
// Game insert: lift-out card trays and token bins fill a measured game box.
// Card dimensions constrain the front bank; token bins fill the remaining area.
// Assembly: glue each bin separately. Leave all bins loose on the carrier floor.
// No game-specific artwork or component shapes are used.

/* [Game box interior] */
box_width = 300; // [180:5:420]
box_depth = 250; // [180:5:380]
box_height = 65; // [40:5:100]
box_ease = 1.5; // [1:0.5:3]

/* [Cards] */
card_width = 66; // [45:1:90]
card_length = 92; // [65:1:130]
deck_count = 3; // [1:1:5]
stack_height = 35; // [20:1:65]
card_ease = 2; // [1:0.5:4]

/* [Tokens] */
token_columns = 3; // [1:1:6]
token_rows = 2; // [1:1:4]
token_height = 28; // [18:1:50]

/* [Material] */
$thickness = 3; // [2:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]

/* [Hidden] */
$material = "plywood";
t = $thickness;
gap = 1.2;
w = box_width - 2 * box_ease;
d = box_depth - 2 * box_ease;
cw = (w - (deck_count + 1) * gap) / deck_count;
cd = card_length + 2 * card_ease + 2 * t;
ch = stack_height + t;
token_zone = d - cd - 3 * gap;
tw = (w - (token_columns + 1) * gap) / token_columns;
td = (token_zone - (token_rows - 1) * gap) / token_rows;
assert(cw - 2 * t >= card_width + 2 * card_ease, "Card trays are too narrow: reduce decks or increase box width");
assert(tw - 2 * t >= 25 && td - 2 * t >= 25, "Token bins need at least 25 mm of clear space");
assert(t + max(ch, token_height) < box_height - 1, "Trays exceed the box height");
module bin(name, width, depth, height, at) {
  part(str(name, " floor"), at = at) finger_rect([width, depth], "out");
  part(str(name, " front"), at = at + [0, t, 0], rotate = [90, 0, 0]) difference() {
    finger_rect([width, height], ["in", "out", "flat", "out"]);
    translate([width / 2, height]) ellipse([min(width * 0.24, 22), min(height * 0.3, 10)]);
  }
  part(str(name, " back"), at = at + [0, depth, 0], rotate = [90, 0, 0])
    finger_rect([width, height], ["in", "out", "flat", "out"]);
  part(str(name, " side"), qty = 2, at = [at, at + [width - t, 0, 0]], rotate = [90, 0, 90])
    finger_rect([depth, height], ["in", "in", "flat", "in"]);
}
part("Carrier floor", at = [0, 0, 0]) {
  rect([w, d], r = 3);
  score() {
    for (i = [0:deck_count - 1]) translate([gap + i * (cw + gap), gap]) outline() rect([cw, cd]);
    for (i = [0:token_columns - 1], j = [0:token_rows - 1])
      translate([gap + i * (tw + gap), cd + 2 * gap + j * (td + gap)]) outline() rect([tw, td]);
  }
}
step("Glue up each card tray and set it loose on the carrier floor")
  for (i = [0:deck_count - 1]) bin(str("Card tray ", i + 1), cw, cd, ch, [gap + i * (cw + gap), gap, t]);
step("Glue up each token bin and set it loose behind the card trays")
  for (i = [0:token_columns - 1], j = [0:token_rows - 1])
    bin(str("Token bin ", j * token_columns + i + 1), tw, td, token_height, [gap + i * (tw + gap), cd + 2 * gap + j * (td + gap), t]);
```

Set power, speed and cut order in your laser software. See the [laser software guide](https://kerfscript.mylasertools.com/docs/compatibility/index.md).
