> Canonical HTML: https://kerfscript.mylasertools.com/models/coaster-caddy/

# Coaster caddy

Coaster caddy: a small finger-jointed bin with an open front scoop. The interior follows the coaster diameter and stacked thickness. Assembly: glue the finger joints. Coasters are not included in the file.

This design has 5 parts on 1 sheet. Customize it in the [playground](https://kerfscript.mylasertools.com/playground/?model=coaster-caddy).

## Downloads

- [KerfScript source](https://kerfscript.mylasertools.com/models/coaster-caddy/coaster-caddy.kerf)
- [SVG](https://kerfscript.mylasertools.com/models/coaster-caddy/coaster-caddy.svg)
- [DXF](https://kerfscript.mylasertools.com/models/coaster-caddy/coaster-caddy.dxf)

## Parts

| Part | Quantity | Size |
| --- | ---: | --- |
| Bottom | 1 | 107 × 36 mm |
| Front | 1 | 107 × 61.9 mm |
| Back | 1 | 107 × 61.9 mm |
| End | 2 | 36 × 61.9 mm |

## Settings

| Name | Default | Range or choices |
| --- | --- | --- |
| `diameter` | `95` | 60 to 140 |
| `coaster_thickness` | `4` | 2 to 8 |
| `capacity` | `6` | 3 to 12 |
| `ease` | `3` | 2 to 6 |
| `$thickness` | `3` | 2 to 6 |
| `$kerf` | `0.15` | 0 to 0.3 |

## Source

```kerf
// Coaster caddy: a small finger-jointed bin with an open front scoop.
// The interior follows the coaster diameter and stacked thickness.
// Assembly: glue the finger joints. Coasters are not included in the file.

/* [Coasters] */
diameter = 95; // [60:5:140]
coaster_thickness = 4; // [2:0.5:8]
capacity = 6; // [3:1:12]
ease = 3; // [2:0.5:6]

/* [Material] */
$thickness = 3; // [2:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]

/* [Hidden] */
$material = "plywood";
t = $thickness;
w = diameter + 2 * ease + 2 * t;
d = capacity * coaster_thickness + 2 * ease + 2 * t;
h = diameter * 0.62 + t;
part("Bottom", at = [0, 0, 0]) finger_rect([w, d], "out");
step("Glue the front and back to the bottom") {
  part("Front", at = [0, t, 0], rotate = [90, 0, 0]) difference() {
    finger_rect([w, h], ["in", "out", "flat", "out"]);
    translate([w / 2, h + 5]) circle(d = diameter * 0.68);
  }
  part("Back", at = [0, d, 0], rotate = [90, 0, 0]) finger_rect([w, h], ["in", "out", "flat", "out"]);
}
step("Glue the ends in")
  part("End", qty = 2, at = [[0, 0, 0], [w - t, 0, 0]], rotate = [90, 0, 90])
    finger_rect([d, h], ["in", "in", "flat", "in"]);
```

Set power, speed and cut order in your laser software. See the [laser software guide](https://kerfscript.mylasertools.com/docs/compatibility/index.md).
