// Coaster caddy: a small finger-jointed bin with an open front scoop. // The interior follows the coaster diameter and stacked thickness. // Assembly: glue the finger joints. Coasters are not included in the file. /* [Coasters] */ diameter = 95; // [60:5:140] coaster_thickness = 4; // [2:0.5:8] capacity = 6; // [3:1:12] ease = 3; // [2:0.5:6] /* [Material] */ $thickness = 3; // [2:0.5:6] $kerf = 0.15; // [0:0.01:0.3] /* [Hidden] */ $material = "plywood"; t = $thickness; w = diameter + 2 * ease + 2 * t; d = capacity * coaster_thickness + 2 * ease + 2 * t; h = diameter * 0.62 + t; part("Bottom", at = [0, 0, 0]) finger_rect([w, d], "out"); step("Glue the front and back to the bottom") { part("Front", at = [0, t, 0], rotate = [90, 0, 0]) difference() { finger_rect([w, h], ["in", "out", "flat", "out"]); translate([w / 2, h + 5]) circle(d = diameter * 0.68); } part("Back", at = [0, d, 0], rotate = [90, 0, 0]) finger_rect([w, h], ["in", "out", "flat", "out"]); } step("Glue the ends in") part("End", qty = 2, at = [[0, 0, 0], [w - t, 0, 0]], rotate = [90, 0, 90]) finger_rect([d, h], ["in", "in", "flat", "in"]);