> Canonical HTML: https://kerfscript.mylasertools.com/models/card-pocket/

# Business card pocket

Card pocket: an open-top card tray with a scooped front and a taller back. Interior width and depth follow the cards and stack, with editable ease. Assembly: glue the five finger-jointed panels. Cards are not supplied.

This design has 5 parts on 1 sheet. Customize it in the [playground](https://kerfscript.mylasertools.com/playground/?model=card-pocket).

## Downloads

- [KerfScript source](https://kerfscript.mylasertools.com/models/card-pocket/card-pocket.kerf)
- [SVG](https://kerfscript.mylasertools.com/models/card-pocket/card-pocket.svg)
- [DXF](https://kerfscript.mylasertools.com/models/card-pocket/card-pocket.dxf)

## Parts

| Part | Quantity | Size |
| --- | ---: | --- |
| Floor | 1 | 100 × 32 mm |
| Front | 1 | 100 × 24 mm |
| Back | 1 | 100 × 55 mm |
| Side | 2 | 32 × 24 mm |

## Settings

| Name | Default | Range or choices |
| --- | --- | --- |
| `card_width` | `90` | 70 to 160 |
| `stack_depth` | `22` | 12 to 60 |
| `back_height` | `55` | 40 to 90 |
| `front_height` | `24` | 18 to 38 |
| `ease` | `2` | 1 to 4 |
| `$thickness` | `3` | 2 to 6 |
| `$kerf` | `0.15` | 0 to 0.3 |

## Source

```kerf
// Card pocket: an open-top card tray with a scooped front and a taller back.
// Interior width and depth follow the cards and stack, with editable ease.
// Assembly: glue the five finger-jointed panels. Cards are not supplied.

/* [Cards] */
card_width = 90; // [70:1:160]
stack_depth = 22; // [12:1:60]
back_height = 55; // [40:1:90]
front_height = 24; // [18:1:38]
ease = 2; // [1:0.5:4]

/* [Material] */
$thickness = 3; // [2:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]

/* [Hidden] */
$material = "plywood";
t = $thickness;
w = card_width + 2 * ease + 2 * t;
d = stack_depth + 2 * ease + 2 * t;
assert(back_height > front_height + 8, "Back must rise above the front lip");
assert(front_height >= 3 * t, "Front lip must be at least three sheet thicknesses high");
// Side corners only meet the common lower wall height. The back rises
// above those joints, without fingers exposed along its upper sides.
part("Floor", at = [0, 0, 0]) finger_rect([w, d], "out");
step("Glue the front and back to the floor") {
  part("Front", at = [0, t, 0], rotate = [90, 0, 0]) difference() {
    finger_rect([w, front_height], ["in", "out", "flat", "out"]);
    translate([w / 2, front_height + 5]) ellipse([w * 0.26, 10]);
  }
  part("Back", at = [0, d, 0], rotate = [90, 0, 0]) union() {
    finger_rect([w, front_height], ["in", "out", "flat", "out"]);
    translate([t, front_height - 0.1]) rect([w - 2 * t, back_height - front_height + 0.1], r = 2);
  }
}
step("Glue the sides in")
  part("Side", qty = 2, at = [[0, 0, 0], [w - t, 0, 0]], rotate = [90, 0, 90]) finger_rect([d, front_height], ["in", "in", "flat", "in"]);
```

Set power, speed and cut order in your laser software. See the [laser software guide](https://kerfscript.mylasertools.com/docs/compatibility/index.md).
