> Canonical HTML: https://kerfscript.mylasertools.com/models/bottle-tote/

# Bottle display tote

Bottle tote: a compartment tray with a tall central handle partition. Bottle diameter and column count generate the footprint and handle span. Assembly: glue all joints and the handle partition to the floor. Use for light display bottles until the chosen material and joints are load tested.

This design has 7 parts on 1 sheet. Customize it in the [playground](https://kerfscript.mylasertools.com/playground/?model=bottle-tote).

## Downloads

- [KerfScript source](https://kerfscript.mylasertools.com/models/bottle-tote/bottle-tote.kerf)
- [SVG](https://kerfscript.mylasertools.com/models/bottle-tote/bottle-tote.svg)
- [DXF](https://kerfscript.mylasertools.com/models/bottle-tote/bottle-tote.dxf)

## Parts

| Part | Quantity | Size |
| --- | ---: | --- |
| Floor | 1 | 158 × 158 mm |
| Long wall | 2 | 158 × 65 mm |
| End wall | 2 | 158 × 65 mm |
| Handle partition | 1 | 150 × 189 mm |
| Cross divider | 1 | 149 × 58 mm |

## Settings

| Name | Default | Range or choices |
| --- | --- | --- |
| `bottle_diameter` | `65` | 45 to 90 |
| `columns` | `2` | 2 to 4 |
| `ease` | `4` | 2 to 8 |
| `wall_height` | `65` | 45 to 100 |
| `handle_height` | `185` | 140 to 240 |
| `$thickness` | `4` | 3 to 6 |
| `$kerf` | `0.15` | 0 to 0.3 |
| `clearance` | `0.15` | 0 to 0.4 |

## Source

```kerf
// Bottle tote: a compartment tray with a tall central handle partition.
// Bottle diameter and column count generate the footprint and handle span.
// Assembly: glue all joints and the handle partition to the floor. Use for
// light display bottles until the chosen material and joints are load tested.

use <kerf/dividers>

/* [Bottles] */
bottle_diameter = 65; // [45:1:90]
columns = 2; // [2:1:4]
ease = 4; // [2:1:8]
wall_height = 65; // [45:5:100]
handle_height = 185; // [140:5:240]

/* [Material] */
$thickness = 4; // [3:0.5:6]
$kerf = 0.15; // [0:0.01:0.3]
clearance = 0.15; // [0:0.05:0.4]

/* [Hidden] */
$material = "plywood";
t = $thickness;
pitch = bottle_diameter + 2 * ease + t;
w = columns * pitch + t;
d = 2 * pitch + t;
inner = w - 2 * t;
slot_h = wall_height - t - 3;
assert(handle_height > wall_height + 55, "Handle needs room above the compartments");
part("Floor", at = [0, 0, 0]) difference() {
  finger_rect([w, d], "out");
  translate([t, d / 2]) slots_for_handle();
}
// Two short tabs locate the handle in the floor, avoiding its cross slots.
module slots_for_handle() {
  for (x = [inner * 0.2, inner * 0.8]) translate([x, 0]) rect([14 + clearance, t + clearance], center = true);
}
step("Glue the long walls and end walls to the floor") {
  part("Long wall", qty = 2, at = [[0, t, 0], [0, d, 0]], rotate = [90, 0, 0]) finger_rect([w, wall_height], ["in", "out", "flat", "out"]);
  part("End wall", qty = 2, at = [[0, 0, 0], [w - t, 0, 0]], rotate = [90, 0, 90]) finger_rect([d, wall_height], ["in", "in", "flat", "in"]);
}
step("Stand the cross dividers on the floor and lower the handle partition over them, tabs into the floor") {
  part("Handle partition", at = [t, d / 2 + t / 2, t], rotate = [90, 0, 0]) difference() {
    union() {
      rect([inner, handle_height], r = 8);
      for (x = [inner * 0.2, inner * 0.8]) translate([x - 7, -t]) rect([14, t + 0.1]);
    }
    translate([inner / 2, handle_height - 25]) rect([min(95, inner - 30), 25], center = true, r = 10);
    for (i = [1:columns - 1]) translate([i * pitch - t / 2 - (t + clearance) / 2, -1]) rect([t + clearance, slot_h / 2 + 1]);
  }
  part("Cross divider", qty = columns - 1, at = [for (i = [1:columns - 1]) [i * pitch, t + 0.5, t]], rotate = [90, 0, 90])
    slotted_divider(d - 2 * t - 1, slot_h, [d / 2 - t - 0.5], "top", clearance);
}
```

Set power, speed and cut order in your laser software. See the [laser software guide](https://kerfscript.mylasertools.com/docs/compatibility/index.md).
